Skip to content
Quest Training

Well Stimulation: Acidizing & Hydraulic Fracturing Training Course

Teaches how to diagnose formation damage, select candidate wells, and design, execute and evaluate acidizing and hydraulic fracturing treatments safely.

UPS · Upstream Operations, Exploration, Drilling, Reservoir & ProductionAll Levels#2956ClassroomEnglish , Arabic
Duration
5 Days
Download BrochureView Upcoming Dates

Free substitution at any time · 30+ days' notice: full refund minus 10%. Cancellation policy

Sectors:Oil & GasCategories:Upstream Operations, Exploration, Drilling, Reservoir & Production

Course Overview

The Well Stimulation: Acidizing & Hydraulic Fracturing Training Course equips petroleum, production, completion, and reservoir engineers, stimulation supervisors, and technical staff with the practical knowledge needed to select, design, execute, and evaluate matrix acidizing, acid fracturing, and hydraulic fracturing treatments. Many wells produce well below their potential, either because of formation damage near the wellbore or because the reservoir rock is too tight to flow at economic rates. A correctly diagnosed and designed stimulation treatment can remove positive skin, create a high-conductivity flow path, and raise the productivity index several times over, while a poorly chosen one can waste chemicals and rig time, damage the formation further, or break into water and gas zones. The course covers the full stimulation workflow. Participants learn formation damage mechanisms, skin and productivity index, and candidate selection using well test, production, and core data. The program then addresses matrix acidizing in sandstone and carbonate formations, including acid systems, additives, diversion, treatment design and placement, and the risks of secondary precipitation, emulsions, and sludge, followed by acid fracturing. Participants also examine hydraulic fracturing, including rock mechanics and in-situ stress, fracture geometry, fracturing fluids and proppants, pumping schedules, fracture modeling concepts, and mini-frac and diagnostic fracture injection test interpretation, as well as execution, quality control, pressure control, chemical handling, flowback and produced water management, multistage completion concepts, and post-treatment evaluation and economics. The course is delivered through case studies, design calculations, treatment chart interpretation, and stimulation planning workshops. Participants leave with a stimulation candidate screening checklist, an acid system selection guide, a fracture design review template, a job quality control and HSE checklist, and a post-treatment evaluation and economics template.

Learning Objectives

  • Analyze how formation damage, skin, and productivity index determine the need for stimulation on Day 1.
  • Select stimulation candidates using production history, pressure transient results, nodal analysis, and core data.
  • Identify formation damage mechanisms, including fines migration, clay swelling, emulsions, water blocks, scale, and fluid invasion.
  • Design sandstone acid treatments, including preflush, hydrofluoric acid main stage, and overflush, while managing precipitation risks.
  • Design carbonate acid treatments using wormholing principles, optimum injection rate, and retarded, emulsified, and viscoelastic acids.
  • Select acid additives, including corrosion inhibitors, iron control agents, surfactants, and anti-sludge agents, based on compatibility testing.
  • Apply mechanical and chemical diversion methods and real-time treatment monitoring to achieve uniform acid placement.
  • Compare acid fracturing with propped hydraulic fracturing and select the appropriate method for carbonate reservoirs.
  • Apply rock mechanics, in-situ stress, and fracture geometry concepts to hydraulic fracture design, including fluid, proppant, and pumping schedule selection.
  • Interpret mini-frac and diagnostic fracture injection test data to estimate closure pressure, fluid efficiency, and leakoff behavior.
  • Plan safe stimulation execution, including pressure control, chemical handling, quality control, flowback, and produced water management.
  • Evaluate stimulation results and economics using post-treatment production, pressure, and well test data by the end of Day 5.

Who Should Attend

This course is designed for petroleum engineers, production engineers, completion engineers, reservoir engineers, and stimulation and well site supervisors who select, design, or supervise acidizing and fracturing treatments. It is also relevant for production chemists, geomechanics specialists, well intervention engineers, HSE professionals supporting pumping operations, and asset managers who approve stimulation programs and budgets. It is particularly valuable for professionals in national and international oil and gas companies developing carbonate, sandstone, and tight reservoirs, pumping and well services companies, and regulators and government entities overseeing stimulation operations and produced water handling.

Learning Outcomes

  • By the end of the course, participants will be able to:
  • Explain how formation damage and skin reduce well productivity.
  • Select wells that will respond profitably to stimulation.
  • Choose between matrix acidizing, acid fracturing, and hydraulic fracturing.
  • Design sandstone and carbonate acid treatments with suitable additives.
  • Recognize and prevent precipitation, emulsion, and sludge problems.
  • Apply diversion methods to place acid where it is needed.
  • Apply rock mechanics and in-situ stress concepts to fracture design.
  • Select fracturing fluids, proppants, and pumping schedules for a given reservoir.
  • Interpret mini-frac and diagnostic fracture injection test results.
  • Plan safe treatment execution, quality control, and flowback.
  • Explain the main multistage completion options for fractured wells.
  • Evaluate treatment results and stimulation economics to improve future decisions.

Course Outline

Course Outline:

Day 1

Stimulation Fundamentals and Candidate Selection

  • Productivity index, inflow performance, and the skin concept
  • Formation damage mechanisms and their sources across the well life
  • Diagnostics: production history, pressure transient results, nodal analysis, and core and fluid data
  • Matching the treatment to the problem: matrix acidizing, acid fracturing, or hydraulic fracturing
  • Practical application: participants quantify skin and potential productivity gain and screen candidate wells for stimulation
Day 2

Sandstone and Carbonate Matrix Acidizing

  • Acid-rock reactions, mineralogy, and acid systems for sandstone and carbonate
  • Sandstone treatment stages, precipitation risks, and maximum injection rate and pressure
  • Carbonate wormholing, optimum injection rate, and retarded, emulsified, and viscoelastic acids
  • Additives, compatibility and sludge testing, and iron control
  • Practical application: participants design a matrix acid treatment and select its fluid stages and additives for a case study well
Day 3

Diversion, Placement, and Acid Fracturing

  • Mechanical and chemical diversion methods
  • Placement by bullheading or coiled tubing and treatment monitoring from pressure response
  • Evaluating acid treatments and common causes of failure
  • Acid fracturing design: etched-fracture conductivity, fluid loss control, and acid selection
  • Practical application: participants compare matrix acidizing and acid fracturing options for a carbonate reservoir
Day 4

Hydraulic Fracturing Design

  • Rock mechanics, in-situ stress, and fracture initiation and propagation
  • Fracture geometry, conductivity, and fracture modeling concepts
  • Fracturing fluids, breakers, proppant selection, and pumping schedules
  • Mini-frac and diagnostic fracture injection test interpretation: closure pressure, fluid efficiency, and leakoff
  • Practical application: participants interpret a calibration test and build a preliminary pumping schedule
Day 5

Execution, HSE, Multistage Completions, and Economics

  • Job execution, quality control, pressure control, and real-time treatment monitoring
  • Chemical handling, flowback, and produced water management
  • Multistage completion concepts: plug-and-perf and sliding sleeve systems
  • Post-treatment evaluation and stimulation economics
  • Final workshop: participants develop a complete stimulation program, quality control and HSE plan, and economic evaluation for a case study well

Upcoming Dates

Selected date

Istanbul · 16 – 20 Aug 2027 · Classroom

Need more details?Chat with us on WhatsApp

CityDatesPrice per ParticipantEarly Bird
IstanbulScheduled
2 – 6 Nov 2026€5,300—
SelectDownload Brochure
KigaliScheduled
9 – 13 Nov 2026€7,700—
SelectDownload Brochure
Kuala LumpurScheduled
16 – 20 Nov 2026€4,700—
SelectDownload Brochure
LisbonScheduled
16 – 20 Nov 2026€6,000—
SelectDownload Brochure
LondonScheduled
23 – 27 Nov 2026€5,800€5,220until 2 Nov
SelectDownload Brochure
MadinahScheduled
30 Nov – 4 Dec 2026€4,800€4,320until 9 Nov
SelectDownload Brochure
MadridScheduled
30 Nov – 4 Dec 2026€6,000€5,400until 9 Nov
SelectDownload Brochure
MakkahScheduled
7 – 11 Dec 2026€4,800€4,320until 16 Nov
SelectDownload Brochure
ManamaScheduled
14 – 18 Dec 2026€5,300€4,770until 23 Nov
SelectDownload Brochure
MarbellaScheduled
21 – 25 Dec 2026€6,000€5,400until 30 Nov
SelectDownload Brochure
MuscatScheduled
21 – 25 Dec 2026€6,300€5,670until 30 Nov
SelectDownload Brochure
OnlineScheduled
27 – 31 Dec 2026€2,700€2,430until 7 Dec
SelectDownload Brochure
AbujaScheduled
4 – 8 Jan 2027€7,700€6,930until 14 Dec
SelectDownload Brochure
ParisScheduled
4 – 8 Jan 2027€6,700€6,030until 14 Dec
SelectDownload Brochure
AccraScheduled
11 – 15 Jan 2027€7,700€6,930until 21 Dec
SelectDownload Brochure
AmmanScheduled
17 – 21 Jan 2027€4,000€3,600until 28 Dec
SelectDownload Brochure
AmsterdamScheduled
18 – 22 Jan 2027€6,000€5,400until 28 Dec
SelectDownload Brochure
BakuScheduled
25 – 29 Jan 2027€5,300€4,770until 4 Jan
SelectDownload Brochure
BangkokScheduled
1 – 5 Feb 2027€6,700€6,030until 11 Jan
SelectDownload Brochure
BarcelonaScheduled
1 – 5 Feb 2027€6,000€5,400until 11 Jan
SelectDownload Brochure
BeirutScheduled
7 – 11 Feb 2027€4,500€4,050until 18 Jan
SelectDownload Brochure
CairoScheduled
14 – 18 Feb 2027€3,800€3,420until 25 Jan
SelectDownload Brochure
Cape TownScheduled
22 – 26 Feb 2027€7,700€6,930until 1 Feb
SelectDownload Brochure
CasablancaScheduled
22 – 26 Feb 2027€4,700€4,230until 1 Feb
SelectDownload Brochure
DammamScheduled
28 Feb – 4 Mar 2027€4,800€4,320until 8 Feb
SelectDownload Brochure
DohaScheduled
7 – 11 Mar 2027€4,700€4,230until 15 Feb
SelectDownload Brochure
DubaiScheduled
7 – 11 Mar 2027€4,700€4,230until 15 Feb
SelectDownload Brochure
ErbilScheduled
14 – 18 Mar 2027€4,000€3,600until 22 Feb
SelectDownload Brochure
FrankfurtScheduled
22 – 26 Mar 2027€6,200€5,580until 1 Mar
SelectDownload Brochure
IstanbulScheduled
22 – 26 Mar 2027€5,300€4,770until 1 Mar
SelectDownload Brochure
IstanbulScheduled
16 – 20 Aug 2027€5,300€4,770until 26 Jul
✓ SelectedDownload Brochure

Available in: Istanbul · Dubai · London · Doha · Amsterdam

Related Courses

Ready to Elevate Your Team's Capabilities?

Speak with our advisors about upcoming programmes or a bespoke corporate training plan.

Download BrochureContact Our Team