Skip to content
Quest Training

Small Satellite (CubeSat) Missions & Space Communications Training Course

Walks through CubeSat mission design, spacecraft subsystems and architecture, and the communication links that connect small satellites with ground stations.

SGSC · Satellite Ground Stations & Space CommunicationsAll Levels#2798ClassroomEnglish , Arabic
Duration
5 Days
Download BrochureView Upcoming Dates

Free substitution at any time · 30+ days' notice: full refund minus 10%. Cancellation policy

Sectors:Telecommunications & Satellite TechnologyCategories:Satellite Ground Stations & Space Communications

Course Overview

The Small Satellite (CubeSat) Missions & Space Communications Training Course provides practical knowledge of small satellite mission design, CubeSat architecture, spacecraft subsystems, and the communication technologies required to establish reliable links between satellites and ground stations. It explores the engineering principles that govern the development, deployment, operation, and monitoring of small satellite missions for scientific research, Earth observation, telecommunications, and technology demonstration. The course examines CubeSat standards, satellite bus architecture, onboard power systems, attitude determination and control, payload integration, and communication subsystem design. Participants explore how size, mass, power consumption, antenna configuration, frequency selection, and orbital characteristics influence mission performance and communication capabilities. Particular emphasis is placed on space communication links, radio frequency fundamentals, uplink and downlink design, link budget calculations, antenna selection, modulation, coding, and data transmission. Participants also examine telemetry, tracking, and command (TT&C), ground station architecture, satellite visibility, contact scheduling, Doppler compensation, and the operational challenges associated with low Earth orbit (LEO) missions. Through practical exercises, engineering calculations, and mission-based scenarios, participants develop the skills required to assess CubeSat communication requirements, evaluate satellite-to-ground link performance, plan ground station contacts, and identify common communication faults. The course also addresses mission operations, data handling, testing, and reliability considerations throughout the small satellite lifecycle.

Learning Objectives

  • Explain the principles, applications, and development lifecycle of small satellite and CubeSat missions.
  • Identify CubeSat form factors, structural configurations, and major spacecraft subsystems.
  • Explain the functions of onboard power, attitude control, onboard computing, payload, and communication systems.
  • Evaluate communication requirements based on mission objectives, orbital parameters, data volume, and available power.
  • Identify suitable frequency bands, antenna configurations, modulation methods, and data transmission approaches.
  • Calculate basic satellite communication link budgets, including transmit power, antenna gain, path loss, and receiver sensitivity.
  • Explain the effects of orbital altitude, satellite visibility, Doppler shift, and ground station location on communication performance.
  • Describe TT&C architecture and the procedures used to monitor satellite health and execute authorized commands.
  • Develop basic ground station contact plans and satellite communication schedules.
  • Identify common communication problems, including weak signals, packet loss, interference, and unsuccessful data transfers.
  • Apply basic procedures for mission testing, communication verification, troubleshooting, and operational monitoring.
  • Prepare technical documentation and operational recommendations supporting reliable CubeSat mission execution.

Who Should Attend

This course is designed for technical professionals, engineers, researchers, and project teams involved in small satellite development, space communications, satellite operations, and ground station engineering. CubeSat and Small Satellite Engineers. Satellite Communications and RF Engineers. Aerospace and Space Systems Engineers. Satellite Mission Planning and Operations Professionals. Ground Station Engineers and Operators. TT&C Engineers and Specialists. Embedded Systems and Onboard Software Engineers. Satellite Payload Integration and Testing Teams. University and Research Laboratory Space Project Teams. Space Technology Project Managers and Technical Coordinators. Engineers transitioning into satellite systems and space communications.

Learning Outcomes

  • Describe CubeSat mission architectures and the principal stages of a small satellite mission.
  • Identify the functions and interfaces of major spacecraft subsystems.
  • Explain the relationship between mission objectives, orbital characteristics, power constraints, and communication requirements.
  • Select suitable communication architectures and antenna configurations for defined mission scenarios.
  • Calculate basic satellite-to-ground link budgets and estimate received signal levels.
  • Explain Doppler shift, satellite visibility, contact windows, and their operational implications.
  • Interpret basic RF measurements and satellite communication performance indicators.
  • Describe telemetry, tracking, and command procedures for routine satellite operations.
  • Develop preliminary ground station contact schedules and communication plans.
  • Identify common communication faults and recommend appropriate diagnostic steps.
  • Explain the purpose of environmental testing, integration testing, and communication verification.
  • Prepare basic mission documentation, communication checklists, and operational reports.

Course Outline

Day 1

Small Satellite Fundamentals and CubeSat Mission Architecture

  • Introduction to small satellites and their applications in Earth observation, scientific research, communications, and technology demonstration.
  • CubeSat concepts, standard unit configurations, dimensions, mass constraints, and deployment considerations.
  • Mission lifecycle: concept development, requirements definition, preliminary design, integration, testing, launch, commissioning, and operations.
  • Spacecraft bus architecture and the relationship between the platform and mission payload.
  • Major subsystems: electrical power, onboard computing, attitude determination and control, thermal management, propulsion where applicable, and communications.
  • Payload requirements, data generation, onboard storage, and data handling.
  • Power, mass, volume, thermal, and interface constraints in CubeSat design.
  • Orbital fundamentals, including low Earth orbit characteristics, orbital period, altitude, and satellite ground tracks.
  • Mission requirements and the trade-offs between payload capability, satellite resources, and operational objectives.
  • Introduction to systems engineering, requirements traceability, and interface control documentation.
  • Practical Exercise: Develop a preliminary mission concept for an Earth observation CubeSat, defining its mission objectives, orbit assumptions, payload requirements, key subsystems, and principal engineering constraints.
Day 2

CubeSat Communication Systems and RF Engineering Fundamentals

  • Communication subsystem architecture and its integration with the spacecraft bus.
  • Radio frequency fundamentals, frequency, wavelength, bandwidth, transmit power, and antenna gain.
  • Overview of commonly used satellite communication bands, including VHF, UHF, S-band, and higher-frequency options where appropriate.
  • Selection of uplink and downlink frequencies according to mission requirements and applicable spectrum authorization.
  • Antenna types and configurations for CubeSats, including monopole, dipole, patch, and deployable antennas.
  • Antenna polarization, radiation patterns, orientation, and the influence of spacecraft attitude on link performance.
  • Transmitters, receivers, transceivers, RF front ends, filters, and communication interfaces.
  • Modulation and coding fundamentals, data rates, bandwidth efficiency, and error protection.
  • Communication protocols, packet framing, addressing, error detection, and data integrity.
  • Onboard data buffering, storage capacity, and prioritization of telemetry and payload data.
  • RF interference, electromagnetic compatibility, and coordination between communications and other spacecraft subsystems.
  • Practical Exercise: Select a communication architecture for a CubeSat with defined telemetry and payload data requirements, specifying the frequency band, antenna type, approximate data rate, and key design considerations.
Day 3

Satellite Link Budgets, Orbital Effects, and Communication Performance

  • Principles and structure of satellite communication link budgets.
  • Transmitter output power, antenna gain, feeder losses, free-space path loss, and receiver sensitivity.
  • Estimating received signal power and determining basic link margins.
  • Ground station antenna gain, receiver noise figure, system noise temperature, and signal-to-noise ratio.
  • Differences between uplink and downlink engineering requirements.
  • Effects of orbital altitude, slant range, satellite elevation angle, and ground station location on signal strength.
  • Doppler shift caused by relative satellite motion and its effect on frequency acquisition and tracking.
  • Satellite visibility, ground tracks, contact windows, and communication opportunities during an orbital pass.
  • Modulation, coding, and data-rate trade-offs under changing link conditions.
  • Antenna pointing, polarization mismatch, atmospheric effects, and other sources of signal degradation.
  • Basic communication availability and the influence of link margin on reliable data transfer.
  • Interpreting signal strength, carrier-to-noise indicators, bit error rate, and packet loss where applicable.
  • Practical Exercise: Calculate a simplified CubeSat downlink budget using specified orbital distance, transmit power, antenna gains, and receiver parameters, then estimate the received signal level and evaluate the communication margin.
Day 4

Ground Stations, TT&C, and Satellite Contact Planning

  • Ground station architecture and its role in CubeSat command, telemetry, and payload data reception.
  • Ground station antennas, rotators, transceivers, modems, software-defined radios, and data interfaces.
  • Telemetry, tracking, and command (TT&C) principles and their role in spacecraft monitoring and control.
  • Satellite acquisition, antenna pointing, azimuth and elevation tracking, and Doppler correction.
  • Predicting satellite passes and calculating ground station visibility windows.
  • Contact scheduling, pass prioritization, and coordination between multiple satellites and ground stations.
  • Uplink command preparation, authorization, transmission, and verification through returned telemetry.
  • Downlink reception, demodulation, packet decoding, data validation, and payload data transfer.
  • Ground station software, pass prediction tools, telemetry dashboards, and operational logs.
  • Managing missed passes, weak signals, unsuccessful contacts, and incomplete data transfers.
  • Ground station network coordination, data routing, and integration with mission control systems.
  • Operational documentation, contact reports, and communication performance records.
  • Practical Exercise: Develop a ground station contact plan for a CubeSat in low Earth orbit, identifying pass windows, communication priorities, antenna tracking requirements, and the procedures for command transmission and telemetry reception.
Day 5

Mission Integration, Testing, Troubleshooting, and Operations

  • Integration of communication hardware and software with the CubeSat platform.
  • Verification of electrical, mechanical, RF, and data interfaces before launch.
  • Functional testing of transmitters, receivers, antennas, onboard communication software, and ground station equipment.
  • Environmental testing considerations, including vibration, thermal cycling, and vacuum testing where applicable.
  • End-to-end communication testing and verification of command, telemetry, and payload data flows.
  • Pre-launch readiness reviews, configuration control, and communication subsystem acceptance criteria.
  • Initial acquisition and commissioning procedures following deployment into orbit.
  • Monitoring spacecraft health, power consumption, communication status, and onboard data storage.
  • Troubleshooting low received signal levels, frequency offsets, packet loss, corrupted data, and communication interruptions.
  • Distinguishing spacecraft communication faults from ground station, tracking, software, and RF interference problems.
  • Operational risk management, contingency procedures, and recovery planning for loss of communication.
  • Mission data handling, archival procedures, performance reporting, and post-pass analysis.
  • Developing maintenance, software update, and operational improvement plans appropriate to small satellite missions.
  • Practical Exercise: Prepare a CubeSat communication commissioning and troubleshooting plan, including pre-launch checks, initial contact procedures, link verification, fault isolation steps, contingency actions, and criteria for confirming successful data transmission.

Upcoming Dates

Selected date

Accra · 6 – 10 Sept 2027 · Classroom

Need more details?Chat with us on WhatsApp

CityDatesPrice per ParticipantEarly Bird
DammamScheduled
2 – 6 Nov 2026€4,800—
SelectDownload Brochure
DohaScheduled
9 – 13 Nov 2026€4,700—
SelectDownload Brochure
DubaiScheduled
15 – 19 Nov 2026€4,700—
SelectDownload Brochure
IstanbulScheduled
23 – 27 Nov 2026€5,300€4,770until 2 Nov
SelectDownload Brochure
JeddahScheduled
29 Nov – 3 Dec 2026€4,800€4,320until 9 Nov
SelectDownload Brochure
KigaliScheduled
30 Nov – 4 Dec 2026€7,700€6,930until 9 Nov
SelectDownload Brochure
Kuala LumpurScheduled
7 – 11 Dec 2026€4,700€4,230until 16 Nov
SelectDownload Brochure
LisbonScheduled
14 – 18 Dec 2026€6,000€5,400until 23 Nov
SelectDownload Brochure
LondonScheduled
21 – 25 Dec 2026€5,800€5,220until 30 Nov
SelectDownload Brochure
MadinahScheduled
28 Dec 2026 – 1 Jan 2027€4,800€4,320until 7 Dec
SelectDownload Brochure
MadridScheduled
4 – 8 Jan 2027€6,000€5,400until 14 Dec
SelectDownload Brochure
ManamaScheduled
11 – 15 Jan 2027€5,300€4,770until 21 Dec
SelectDownload Brochure
MilanScheduled
11 – 15 Jan 2027€7,000€6,300until 21 Dec
SelectDownload Brochure
MunichScheduled
18 – 22 Jan 2027€6,000€5,400until 28 Dec
SelectDownload Brochure
MuscatScheduled
25 – 29 Jan 2027€6,300€5,670until 4 Jan
SelectDownload Brochure
OnlineScheduled
31 Jan – 4 Feb 2027€2,700€2,430until 11 Jan
SelectDownload Brochure
ParisScheduled
8 – 12 Feb 2027€6,700€6,030until 18 Jan
SelectDownload Brochure
RiyadhScheduled
15 – 19 Feb 2027€4,800€4,320until 25 Jan
SelectDownload Brochure
RomeScheduled
22 – 26 Feb 2027€7,000€6,300until 1 Feb
SelectDownload Brochure
AbujaScheduled
1 – 5 Mar 2027€7,700€6,930until 8 Feb
SelectDownload Brochure
ViennaScheduled
1 – 5 Mar 2027€6,400€5,760until 8 Feb
SelectDownload Brochure
AccraScheduled
8 – 12 Mar 2027€7,700€6,930until 15 Feb
SelectDownload Brochure
AmmanScheduled
14 – 18 Mar 2027€4,000€3,600until 22 Feb
SelectDownload Brochure
AmsterdamScheduled
22 – 26 Mar 2027€6,000€5,400until 1 Mar
SelectDownload Brochure
BakuScheduled
29 Mar – 2 Apr 2027€5,300€4,770until 8 Mar
SelectDownload Brochure
BangkokScheduled
5 – 9 Apr 2027€6,700€6,030until 15 Mar
SelectDownload Brochure
BarcelonaScheduled
12 – 16 Apr 2027€6,000€5,400until 22 Mar
SelectDownload Brochure
CairoScheduled
12 – 16 Apr 2027€3,800€3,420until 22 Mar
SelectDownload Brochure
Cape TownScheduled
19 – 23 Apr 2027€7,700€6,930until 29 Mar
SelectDownload Brochure
CasablancaScheduled
26 – 30 Apr 2027€4,700€4,230until 5 Apr
SelectDownload Brochure
AccraScheduled
6 – 10 Sept 2027€7,700€6,930until 16 Aug
✓ SelectedDownload Brochure

Available in: Istanbul · Dubai · London · Riyadh · Doha · Amsterdam

Related Courses

Ready to Elevate Your Team's Capabilities?

Speak with our advisors about upcoming programmes or a bespoke corporate training plan.

Download BrochureContact Our Team