Phased Array Ultrasonic Testing (PAUT) Training Course

Course Overview

Learning Objectives

• Analyze the fundamental principles of ultrasonic testing and phased array technology within the course context.
• Evaluate PAUT applications according to material type, component geometry, weld configuration, thickness, and inspection objectives.
• Apply principles of probe selection, element configuration, beam steering, focusing, and focal law development.
• Develop appropriate PAUT inspection configurations for defined weld and component geometries.
• Perform equipment setup, calibration, sensitivity verification, and system checks before examination activities.
• Assess scanning coverage and determine whether the selected configuration provides adequate examination of the required inspection volume.
• Analyze phased array data and images to identify relevant indications and potential discontinuities.
• Evaluate common weld indications and distinguish relevant defects from geometric or non-relevant responses.
• Interpret examination results in accordance with approved procedures and applicable acceptance requirements.
• Improve inspection documentation by recording examination parameters, findings, limitations, and evaluation results.
• Strengthen quality control through systematic verification of equipment performance, data quality, and inspection coverage.
• Design a practical PAUT examination plan that integrates inspection objectives, equipment configuration, scanning strategy, data acquisition, and reporting.

Who Should Attend

Learning Outcomes

• Explain the operating principles and technical foundations of Phased Array Ultrasonic Testing.
• Distinguish PAUT from conventional ultrasonic testing techniques and identify appropriate applications for each.
• Identify suitable phased array probes, wedges, frequencies, and configurations for defined inspection applications.
• Explain beam steering, electronic scanning, focusing, and focal law principles.
• Configure PAUT equipment according to defined examination requirements and approved procedures.
• Perform appropriate calibration and verify system sensitivity and performance before inspection.
• Establish suitable scanning paths and evaluate required examination coverage.
• Acquire and record PAUT inspection data in a systematic and traceable manner.
• Interpret common phased array inspection displays and identify relevant indications.
• Evaluate weld discontinuities and distinguish relevant indications from geometric responses.
• Assess data quality and identify factors that can compromise inspection reliability.
• Prepare professional PAUT examination records and reports containing inspection parameters, findings, and evaluation results.

Course Outline