Skip to content
Quest Training

Artificial Lift Design Process and Optimization Training Course

Shows how to select, design and optimize artificial lift systems from well, reservoir and fluid data to raise production as well conditions change over time.

UPS · Upstream Operations, Exploration, Drilling, Reservoir & ProductionAll Levels#1855ClassroomEnglish , Arabic
Duration
5 Days
Download BrochureView Upcoming Dates

Free substitution at any time · 30+ days' notice: full refund minus 10%. Cancellation policy

Sectors:Oil & GasCategories:Upstream Operations, Exploration, Drilling, Reservoir & Production

Course Overview

This advanced training course provides a comprehensive and practical approach to artificial lift design, selection, performance evaluation, and optimization for oil and gas wells. It focuses on improving well productivity, maximizing production rates, managing changing reservoir and well conditions, and achieving efficient and reliable artificial lift performance throughout the well lifecycle. The course examines the major artificial lift methods used in oil and gas production, including sucker rod pumping, electric submersible pumping, gas lift, progressive cavity pumping, and hydraulic pumping systems. Participants will learn how to evaluate well and reservoir conditions, production requirements, fluid characteristics, pressure conditions, and operational constraints when selecting and designing an appropriate artificial lift system. A strong emphasis is placed on the artificial lift design process, including data gathering, well performance analysis, inflow and outflow relationships, operating envelope definition, equipment sizing, system configuration, operating point selection, and performance forecasting. Participants will also examine how changes in reservoir pressure, water cut, gas-oil ratio, fluid properties, and well conditions affect artificial lift performance. The program integrates design with optimization, surveillance, troubleshooting, failure prevention, and lifecycle management. Through practical calculations, case studies, and design workshops, participants will develop the ability to identify performance limitations, optimize operating parameters, reduce production losses, improve equipment reliability, and select appropriate interventions for artificial lift systems.

Learning Objectives

  • By the end of the course, participants will be able to:
  • Analyze the principles and applications of artificial lift systems in oil and gas production.
  • Evaluate well, reservoir, fluid, and production data required for artificial lift design.
  • Compare artificial lift methods and select the most appropriate system for specific well conditions.
  • Apply inflow and outflow performance concepts to artificial lift system design.
  • Develop artificial lift design parameters based on production targets and well constraints.
  • Evaluate equipment sizing, operating ranges, and system configuration.
  • Analyze the impact of pressure, fluid properties, water cut, gas production, and well conditions on lift performance.
  • Optimize artificial lift operating parameters to improve production and efficiency.
  • Diagnose common artificial lift performance problems and identify their causes.
  • Develop strategies for reducing failures, downtime, energy consumption, and operating costs.
  • Apply production surveillance and performance data to identify optimization opportunities.
  • Develop intervention and optimization plans for changing well and reservoir conditions.

Who Should Attend

This course is designed for petroleum engineers, production engineers, artificial lift engineers, well performance engineers, reservoir engineers, completion engineers, and field operations professionals involved in oil and gas well production and artificial lift systems. It is particularly suitable for professionals responsible for artificial lift design, well optimization, production surveillance, pump performance, gas lift operations, production troubleshooting, well intervention, and production engineering studies. The program is also relevant to production supervisors, asset engineers, operations managers, technical specialists, reliability and maintenance professionals, and decision-makers responsible for maximizing well productivity, improving artificial lift reliability, controlling operating costs, and optimizing field production.

Learning Outcomes

  • Upon completion of the course, participants will be able to:
  • Explain the principles, applications, advantages, and limitations of major artificial lift methods.
  • Identify the data requirements for artificial lift system selection and design.
  • Evaluate well inflow and outflow performance for artificial lift applications.
  • Select suitable artificial lift methods based on reservoir, well, fluid, and production conditions.
  • Develop preliminary and detailed artificial lift design parameters.
  • Evaluate pump, tubing, gas injection, motor, and surface equipment requirements.
  • Determine appropriate operating ranges and performance targets.
  • Analyze artificial lift system performance using production and operating data.
  • Identify underperforming artificial lift systems and diagnose common problems.
  • Optimize operating parameters to improve production, efficiency, and equipment life.
  • Evaluate the effects of changing water cut, gas-oil ratio, pressure, and fluid properties.
  • Develop corrective actions and intervention strategies for artificial lift problems.
  • Improve energy efficiency and reduce artificial lift operating costs.
  • Establish surveillance and performance monitoring practices.
  • Develop lifecycle optimization strategies for artificial lift systems.

Course Outline

Course Outline

Day 1

Artificial Lift Fundamentals & Well Performance

  • Principles and objectives of artificial lift in oil and gas production.
  • Natural flow limitations and the need for artificial lift.
  • Overview of major artificial lift systems and their applications.
  • Well inflow performance and pressure relationships.
  • Tubing performance and outflow behavior.
  • Well and reservoir data requirements for lift design.
  • Practical Application: Evaluate a well's production conditions and determine the need and objectives for an artificial lift system.
Day 2

Artificial Lift Selection & Design Process

  • Artificial lift selection criteria and decision-making framework.
  • Evaluating sucker rod pumping, electric submersible pumping, gas lift, progressive cavity pumping, and hydraulic pumping.
  • Well depth, production rate, fluid properties, pressure, temperature, and completion considerations.
  • Production targets and artificial lift operating envelopes.
  • Equipment sizing and system configuration.
  • Design constraints, surface requirements, and operating limitations.
  • Practical Application: Select the most suitable artificial lift method for different well scenarios and develop preliminary design parameters.
Day 3

Artificial Lift System Design & Performance Analysis

  • Detailed design considerations for major artificial lift systems.
  • Pump sizing, operating point, efficiency, and performance characteristics.
  • Gas lift injection principles and injection rate optimization.
  • Electric submersible pump system configuration and operating considerations.
  • Sucker rod and progressive cavity pump design considerations.
  • System performance forecasting and operating envelope development.
  • Practical Application: Develop and evaluate an artificial lift design using representative well and production data.
Day 4

Artificial Lift Optimization, Troubleshooting & Reliability

  • Artificial lift surveillance and performance monitoring.
  • Identifying production losses and underperforming lift systems.
  • Common pump, gas lift, tubing, electrical, mechanical, and operational problems.
  • Gas interference, pump-off conditions, excessive water production, solids, scaling, and fluid-related problems.
  • Optimization of operating parameters and production settings.
  • Failure prevention, reliability improvement, and intervention planning.
  • Practical Application: Diagnose an artificial lift performance problem and develop an optimization and corrective action plan.
Day 5

Advanced Optimization & Lifecycle Management

  • Artificial lift optimization under changing reservoir and well conditions.
  • Managing increasing water cut, changing gas-oil ratio, declining pressure, and changing fluid properties.
  • Energy efficiency and operating cost optimization.
  • Artificial lift replacement, redesign, intervention, and workover decisions.
  • Integrating artificial lift performance with field production optimization.
  • Performance indicators, surveillance strategies, and continuous improvement.
  • Final Workshop: Develop an integrated artificial lift design and optimization plan for a producing well, covering system selection, design parameters, operating strategy, surveillance, troubleshooting, intervention priorities, and lifecycle optimization.

Upcoming Dates

Selected date

Doha · 11 – 15 Jan 2027 · Classroom

Need more details?Chat with us on WhatsApp

CityDatesPrice per ParticipantEarly Bird
CasablancaScheduled
2 – 6 Nov 2026€4,700—
SelectDownload Brochure
LisbonScheduled
2 – 6 Nov 2026€6,000—
SelectDownload Brochure
MunichScheduled
2 – 6 Nov 2026€6,000—
SelectDownload Brochure
AmmanScheduled
9 – 13 Nov 2026€4,000—
SelectDownload Brochure
DammamScheduled
9 – 13 Nov 2026€4,800—
SelectDownload Brochure
LondonScheduled
9 – 13 Nov 2026€5,800—
SelectDownload Brochure
MuscatScheduled
9 – 13 Nov 2026€6,300—
SelectDownload Brochure
OnlineScheduled
15 – 19 Nov 2026€2,700—
SelectDownload Brochure
AmsterdamScheduled
16 – 20 Nov 2026€6,000—
SelectDownload Brochure
DohaScheduled
16 – 20 Nov 2026€4,700—
SelectDownload Brochure
MadinahScheduled
16 – 20 Nov 2026€4,800—
SelectDownload Brochure
DubaiScheduled
22 – 26 Nov 2026€4,700—
SelectDownload Brochure
BakuScheduled
23 – 27 Nov 2026€5,300—
SelectDownload Brochure
MadridScheduled
23 – 27 Nov 2026€6,000—
SelectDownload Brochure
ParisScheduled
23 – 27 Nov 2026€6,700—
SelectDownload Brochure
BangkokScheduled
30 Nov – 4 Dec 2026€6,700€6,030until 9 Nov
SelectDownload Brochure
FrankfurtScheduled
30 Nov – 4 Dec 2026€6,200€5,580until 9 Nov
SelectDownload Brochure
MakkahScheduled
30 Nov – 4 Dec 2026€4,800€4,320until 9 Nov
SelectDownload Brochure
RabatScheduled
30 Nov – 4 Dec 2026€4,700€4,230until 9 Nov
SelectDownload Brochure
BarcelonaScheduled
7 – 11 Dec 2026€6,000€5,400until 16 Nov
SelectDownload Brochure
GenevaScheduled
7 – 11 Dec 2026€7,300€6,570until 16 Nov
SelectDownload Brochure
ManamaScheduled
7 – 11 Dec 2026€5,300€4,770until 16 Nov
SelectDownload Brochure
RomeScheduled
7 – 11 Dec 2026€7,000€6,300until 16 Nov
SelectDownload Brochure
BerlinScheduled
14 – 18 Dec 2026€6,300€5,670until 23 Nov
SelectDownload Brochure
IstanbulScheduled
14 – 18 Dec 2026€5,300€4,770until 23 Nov
SelectDownload Brochure
MarrakeshScheduled
14 – 18 Dec 2026€4,700€4,230until 23 Nov
SelectDownload Brochure
ViennaScheduled
14 – 18 Dec 2026€6,400€5,760until 23 Nov
SelectDownload Brochure
CairoScheduled
21 – 25 Dec 2026€3,800€3,420until 30 Nov
SelectDownload Brochure
Kuala LumpurScheduled
21 – 25 Dec 2026€4,700€4,230until 30 Nov
SelectDownload Brochure
MilanScheduled
21 – 25 Dec 2026€7,000€6,300until 30 Nov
SelectDownload Brochure
DohaScheduled
11 – 15 Jan 2027€4,700€4,230until 21 Dec
✓ SelectedDownload Brochure

Available in: Istanbul · Dubai · London · Doha · Amsterdam

Related Courses

Ready to Elevate Your Team's Capabilities?

Speak with our advisors about upcoming programmes or a bespoke corporate training plan.

Download BrochureContact Our Team